Novus DigiRail-2R Manual de usuario descargar pdf (Pagina 4)

DigiRail-2R

NOVUS AUTOMATION 4/4

Internally used by the DigiConfig software.

Bit at 0: Output deactivated

Bit at 1: Output activated

Bit 15

Outlet - - - - - - -

REGISTERS 12 TO 15 – DURATION OF RELAY ACTIVATION

Time, in hundredths of seconds, during which the relay stays active after an activation command. A zero time value will

keep the relay active until a deactivation command is received.

REGISTERS 20 TO 23 – TIME FOR DEACTIVATING THE RELAY (WHEN ACTIVATION TEMPORIZED)

Time, in hundredths of seconds, which remains for the relay be deactivated after an activation command.

REGISTERS 34 TO 48 – TAGS

DigiRail features some identification tags, where characters can be written in order to help identifying the device and its

outputs:

- Identification tag of the device (10 characters).

- Identification tag of the output channels (10 characters for each output).

Provides the code of the DigiRail model. Internally used by the DigiConfig software.

Model Amount

2A 1

2R 3

4C 4

1 2 3 4

Sin comentarios

Novus DigiRail-2R Manual de usuario Pagina 4