Novus DC80L Manual de usuario

1 INDEX 1. INTRODUCTION ... 1 2. SAFETY INFORMATION ...

10 5.3. PROTECTION The MODEL DC80L calibrator uses two protection fuses, rated 125 mA / 250 V, internally connected in series with the current termin

11 DC mV and V generation 1. Press the power switch to turn on the Calibrator. 2. Press the INPUT / OUTPUT mode key to select OUTPUT mode . 3.

12 b) Measurements using calibrator’s internal power supply for powering the loop The calibrator provides an internal 24 V power supply for measuring

13 b) Simulating a 2-wireTransmitter (sink transmitter) 1. Press the power switch to turn on the Calibrator. 2. Press the INPUT / OUTPUT mode key

2 2. SAFETY INFORMATION To avoid possible electric shock or personal injury: • Use the Calibrator only as specified in this manual, or the protection

3 3.1. MODEL DC80T GENERAL SPECIFICATIONS Maximum voltage allowed between any terminal and earth ground or between the two input terminals: ...

4 3.3. MODEL DC80T OPERATING INSTRUCTIONS In thermocouple temperature simulation the calibrator generates the voltage as an actual thermocouple, cons

5 4. MODEL DC80R The MODEL DC80R RTD Process Calibrator measures and simulates resistance values of 7 distinct types of RTDs, either in °C or °F. Simu

6 4.1. MODEL DC80R GENERAL SPECIFICATIONS Maximum voltage allowed between any terminal and earth ground or between the two input terminals: ...

7 4.3. MODEL DC80R OPERATING INSTRUCTIONS RTD measurement 1. Press the power switch to turn ON the calibrator. 2. Press the INPUT / OUTPUT key to

8 5. MODEL DC80L The DC80L is the calibrator model for measuring and simulating V, mV and mA signals. The DC80L is capable of measuring and generating

9 5.1. MODEL DC80L GENERAL SPECIFICATIONS Maximum voltage allowed between any terminal and earth ground or between the two input terminals: ...